Marco FRIIA HCS Hot, Cold and Sparkling Water Dispenser

Font: 30mm W x 138mm D x 287mm H w/o drip tray (233mm tap to counter)

Boiler: 210mm W x 385mm D x 444mm H

Chiller: 259mm W 436mm D x 455mm H

Power Reqs: Boiler: 2.8kW; Chiller: 180W

3 Litre Rapid Draw Off

Cups Per Hour (170ml): Hot: 165; Cold 235 (ΔT = 10 °C)

PLEASE NOTE THAT FILTERS ARE RECOMMENDED

2 Years Warranty

Any questions? Need assistance? Call our helpline on 01603 756134

Product Details

Font: 30mm W x 138mm D x 287mm H w/o drip tray (233mm tap to counter)

Boiler: 210mm W x 385mm D x 444mm H

Chiller: 259mm W 436mm D x 455mm H

Power Reqs: Boiler: 2.8kW; Chiller: 180W

3 Litre Rapid Draw Off

Cups Per Hour (170ml): Hot: 165; Cold 235 (ΔT = 10 °C)

Plumbing Reqs: Boiler & Chiller: 3/4" BSP

Cooling Capacity: 35-40 lt/hr (based on incoming water temperature of 15°C and output water temperature of 5-7°C)

Compressor Power: 1/8hp

Cooling System: Aluminium Block

Refrigerant: R290

23% more energy-efficient than leading competitors

Easy to install

Space-saving countertop font

Counter cut-outs required

Includes Drip Tray

Includes CO2 Regulator

Code: 1000865

Please see ventilation guidelines in the specification sheet below

Recommended sanitisation products available: internal water cooler sanitising solution 1l and chiller best service cartridge - please contact us for details

PLEASE NOTE THAT FILTERS ARE RECOMMENDED

You will need to acquire your own CO2 gas bottle - searching for a 5kg bottle is recommended

2 Years Warranty

The perfect hot/cold system for workplace, canteens, gyms, institutions or small coffee shops.

Please note that all products are shipped directly from the manufacturer / supplier so contact us if you wish to check on stock availability.

THIS IS A COMMERCIAL PRODUCT INTENDED FOR USE ON A COMMERCIAL SITE. WARRANTY TERMS MAY BE AFFECTED IF USED IN A NON-COMMERCIAL ENVIRONMENT. B2B (BUSINESS TO BUSINESS) TERMS APPLY.